Our Products
(CPES™) The Epoxy Sealer that is different
CPES™ (Clear Penetrating Epoxy Sealer)
 This is
the base product for any wood rot repair. Applied liberally, it will penetrate
dry-rotted wood and go into the first layers of good wood, discouraging and encapsulating
rot fungi and restoring the soft wood to structural strength. Other chemical
products may put a temporary stop to wood rot, but only a premium epoxy can give
long-term solutions, restore strength and endure under extreme environmental
conditions. All epoxy products are not the same. Most are made from petrochemicals. "Clear
Penetrating Epoxy Sealer" (CPES™)
is substantially made from wood itself and these particular resins when cured,
will have a toughness and flexibility that is comparable to the original wood.
(CPES™) contains
a feature which dissolves moisture in wood. Try bending cured epoxy products
by other names-. (Wear safety glasses.) Premium epoxy products must flex as wood
will, under different regional weather conditions. This product is also one of
the best primers we have ever seen and applies to any type of coatings. If you
are tired of getting paint to stick and last, (CPES™) is your cure. (CPES™)
allows wood to breath and is a 1:1 mix.
 MultiWoodPrime™
MultiWoodPrime inpregnates the wood with flexible epoxy and glues the wood fibers
back together.
The name "MultiWoodPrime" means it is a multiple-function
primer. It promotes topcoat
adhesion, seals surface porosity, blocks Tannin bleed, neutralizes wood acidity,
resists coating failure and toughens up a soft surface for light sanding. The
treated wood can still breathe. Using MultiWoodPrime first makes paint or varnish
last longer. MultiWoodPrime is made largely from the natural resins of wood itself.
The paint therefore has a strongly attached, chemically compatible surface and
is bonded to it better than the paint can adhere by itself.
MultiWoodPrime glues the paint to the wood.
 FILL-IT™ Epoxy Wood Filler
We have never seen a better wood filler then this. The perfect follow-up to the
(CPES™) or Layup & Laminating Epoxy Resin™. Fill-It is also
made from natural wood resins. It is the preferred product in the restoration
of wood which has been subject to dry-rot cavities or mechanical damage. It is
a non-sagging, non-shrink paste which will produce high strength, light weight,
easy shaping and sanding. Will expand and contract with wood without separating
or cracking. The solution to long term restoration. A 1:1 mix. Colour pigments
available to match the colour of wood.
 Layup And Laminating Epoxy Resin (L & L™)
This is a moderately thin and convenient 1:1 mix of resin/catalyst obtained from
natural wood products. More expensive to manufacture than the standard petro-based
resins, but it bonds better to wood and is tougher and more flexible than any
other epoxy resin you can buy. This product should be used as a follow-up to
the (CPES™) when there are voids to fill. It will form the tightest epoxy bond
you can get. Easily mixed with very fine sawdust to make a paste that can be
smoothed into cracks and cavities. The solution to long term restoration. This
product and Fill-ItT can be coloured to match the colour of wood.
 Tropical Hardwood Epoxy Glue
GLUES ALL WOODS HARD OR SOFT
Tropical Hardwood Epoxy is highly flexible glue, which will glue not only oily hardwoods including mahogany and teak, but oak, spruce or any softer wood. It has also successfully bonded Burmese Teak, White or Red oak, Osage orange, Apetong, Araki and lignum vitae. Oily hardwoods need no special pretreatment. A freshly sanded or saw-cut surface is adequate surface preparation. It will (with proper surface preparation) glue a wide variety of metals, glass, and rubber or plastic materials. The cured adhesive is completely waterproof and weatherproof."
Additional Technical Information
 Oak and Teak Epoxy Glue™
Oak and Teak Epoxy Glue™ will glue all oily hardwoods. It will also
(with proper chemical surface preparation) glue a wide variety of
metals, glass, rubber, and plastic materials. The cured adhesive
is completely waterproof and weatherproof.
Additional Technical Information
Damp Concrete Primer™
 What it does: It chemically bonds to any topcoat we know of, creating a strong water-resistant chemical bond. They stick and stay stuck. Damp Concrete Primer forms chemical bonds with properly prepared concrete, as well as with freshly applied isocyanate-cured polyurethane paints or polyurethane elastomeric coatings or amine-cured epoxy paints or epoxy coatings.
Additional Technical Information
 Permanent Concrete Sealer™
This is an odor-free water - based, non - toxic, non - acid concrete cleaner and sealer which may be applied to new or old concrete. Its powerful detergent combination flushes out oil and dirt from concrete, for a clean look and good adhesion of anything else. It contains no solvents whatsoever. Its V.O.C. [Volatile Organic Content] is zero.
Additional Technical Information
 Epoxy Clean-up Solvent (ECS™)
A single component epoxy solvent which cleans up uncured CPEST (Clear
Penetrating Epoxy Sealer), Fill-ItT Epoxy Wood Filler, L&L™ (Laminating & Layup
Epoxy), Tropical and All Wood Glues. Also cleans brushes, rollers, sprayers and
tools. This product is also used to remove epoxy resins from the surface of wood,
concrete and terrazzo if you prefer the natural look. This is a much preferred
product over acetone since it leaves no residue on the surface and evaporation
is slower.
Very Fine Sawdust
 This is mixed with (L&L™) to provide a 50:50 mix. This paste is used
to fill cracks and cavities in logs and large timbers. When cured, it is very
flexible and stronger then wood.
|
